Quick Answer: How do I identify a 47RE transmission?

How do I know if I have a 47rh or 47RE?

The easiest way to tell the difference is the plug where wires plug into trans coming from PCM. The RH has a 4 pin not quite flat like a trailer connector and the RE has a round 8 pin plug. The RH uses an external fluid temp sensor while the RE has a thermistor inside of the governer pressure sensor.

How do I identify my Dodge transmission?

Transmission identification numbers are stamped on the driver side of the case flange just above the oil pan gasket (just below the TV lever). There will be a 9 digit part number, a space, a 4 digit build date, a space, and a 4 digit serial number. 6 = strength of trans.

How do I know what transmission is in my Cummins?

Confirm the automatic transmission. The Chrysler-manufactured automatic 47Re and RH transmissions are identifiable by finding the ID tag attached to the transmission housing. According to Dodge Ram, the 47 Series is identified by the numbers stamped on the driver’s side of the transmission housing.

Do I have 47RE or 48RE?

Externally Late 47re is going to look same as 48re, need to either decode casting numbers or part number stamped on trans case or if trans or look at valve body and planetary, 6 pinion/steel =48re, to be sure.

Are 47RE and 47RH interchangeable?

A 47RH governor will not fit in a 47RE transmission so even if you can swap the VB the transmission won’t shift.

IT\'S FUNNING:  Can a car window break on its own?

What transmission is better 47RH or 47RE?

The stock 47RH output is much stronger than the stock 47RE output.