# What wires go to car battery?

Contents

## How do you connect wires to a battery?

Connecting Batteries In Series

Using a clamp, connect one of the wires to the positive terminal of one of the batteries. Connect the second wire to the positive terminal of the other battery. Connect the loose end of one wire to the negative terminal of the second battery.

## How many wires go to the positive side of battery?

Automobiles. Battery cables are most commonly found in automobiles and transfer electric current from the battery to the vehicle’s electrical parts. You will generally find two cables– the positive cable, which connects to the starter, and the ground cable, which connects to the engine block or the chassis.

## Do you disconnect ground wire first?

The grounded terminal should be disconnected first to ensure that a battery dead-short does not occur, should the spanner disconnecting the other one contact a nearby grounded metal part. A battery dead-short will result in short circuit currents of the order of hundreds of amperes and heavy sparks.

## Why do you connect the positive terminal first?

Connect positive first, negative having less potential won’t arc. The higher the voltage, the greater the chance of arcing and fusion. On a car if negative first and you are touching any metal part of car, when attaching positive there is possibility of arcing through you. Your body becomes part of the circuit.

IT\'S FUNNING:  How do you adjust a car door backwards?

## How do you hook up a power cord to a car battery?

Attach one red jumper cable clamp to the positive terminal on the dead battery. Attach the other end of the same cable, the second red jumper cable clamp, to the positive terminal on the working (live) car battery. Attach one black jumper cable clamp to the negative terminal of the working (live) car’s battery.

## What is a B+ terminal?

B+ is the voltage found at the positive terminal of the battery before any voltage drops reduce it.

## Where does the positive wire from the alternator go?

Locate the terminal on the alternator labeled “B”, “Bat” or “Pos.” All alternators have this terminal. The wire that connects to it is red and goes to the battery. It is a heavy duty wire as it has to carry high current.