What transmission comes on a 351W?
Ford’s most adaptable auto transmission for years has been the C4, the light-duty three-speed introduced in 1964 and offered behind four-, six- and small eight-cylinder engines, namely the 260, 289, 302 and 351W motors. You’ll find them in Galaxie, Fairlane, and some Falcon models.
Will a C6 transmission fit a 351W?
— No, that 351W will not bolt onto your 351M C6. — No, all 351W engines used the 351W bellhousing pattern, shared by the 302, 289, and 300-I6. — Your C6 uses a pattern shared by the 351C, 351M/400M (same engine block), and 429/460.
Will a C4 transmission fit a 351?
Registered. yes. the 351C uses the same bellhousings as the small blocks. However, one thing to remember is if you build up the engine much or plan on racing the stock C4 is a weaker transmission than a C6.
Will a 302 transmission fit a 351?
Stock 302 headers will bolt up to the head of a 351w (since the heads are basically the same), but will not mate up to the factory 302 mid-pipe due to the extra width of the 351w, and may even make contact with the transmission tunnel.
Will a t5 transmission fit a 351W?
It will work. The 351W uses a 164 tooth flywheel, but as long as you use a 157 tooth 302 flywheel, it fits.
Will a 4R70W fit a 351W?
– A 4R70W or AODE from behind any 5.0 (302) or V6 3.8L Mustang or V6 4.2L F150 will bolt up/work behind any 289/302/5.0/351W/351C/5.8L.
What motor will bolt up to a C6 transmission?
The 351m, 400, 429, 460 all bolt up to the C6 transmission without any adapters.
Is a Ford C6 transmission good?
The C6 is the strongest, most durable light duty automatic Ford has made. It was designed in the 60’s during the horsepower wars. The E4OD / 4R100 is not necessarily a “crap” transmission, it is based on the C6.
Will a 351W bolt up to a C4 transmission?
if it’s a 351w it should bolt up to the bell housing of your c-4. I am Skuzzlebutt, Lord of the Mountain! Most, if not all C-4s have the small block bolt pattern, So it should work fine.
Which is better C4 or C6 transmission?
The C4 transmission was primarily used in cars. The C6 transmission could handle more power. Due to the ability to handle more power, the C6 transmission was used in many Ford trucks with bigger engines, and in larger cars that were manufactured with bigger engines.
What transmissions bolt up to a 351 Cleveland?
What transmissions bolt up to a 351 Cleveland? The 351W and 351C use the small block bellhousing bolt pattern. The 351M and 400 use the big block bolt pattern. The C4 auto trans, which has a separate bell, can be used, but you’ll probably have to go with an aftermarket bell for the big block pattern.