How do I identify a c6 transmission?

How many different C6 transmissions are there?

This gave it the capability to handle 475 ft-lb of torque. The C6 was used in trucks and cars with larger engines. Five different bell housing varieties exist for use with various Ford engine families: The Windsor pattern was used on the 300 I6, the Ford Windsor engines and the 351 Cleveland.

How can I tell what Ford transmission I have?

The prime identification source is the pan located on the bottom of the transmission; its shape and bolt count is indicative of which model transmission is present.

  1. Inspect the pan found on the bottom of the transmission. …
  2. Count the number of bolts on the transmission pan.

What engines bolt to a C6 transmission?

What engines will a C6 transmission fit? The C6 was an automatic transmission used on engines such as the 351 Cleveland and the Ford 385 engines. Some well-known applications of the C6 transmission are the Ford Torino, Thunderbird and Mustang (This transmission has no relation the C6 Corvette).

Will a C6 transmission bolt a 302?

Premium Member. The C6 will physically bolt onto either the 289 or 302 but I don’t think it will fit the 66 tunnel without some modification to the tunnel. It should fit the 68 tunnel fine, since a big block with a C6 was available that year.

IT\'S FUNNING:  Can you add a tow hitch to a car?

What’s the difference between E4OD and C6?

The E4OD will have a wire harness behind a metal cover towards the rear of the trans. The C6 will have no wires in this area. Also on the drivers’ side of the IP, a C6 will have vacuum lines, an E4OD will have wires.

How much power can a C6 transmission handle?

Yes a c6 will hold 500 hp but not a stock one with 3 high gear clutches or a stock valvebody…. A good upgrade is to remove the wave washer from the forward clutch and fit 5 plates,upgrade the high gear clutch to at least 4 but 5 is better and go with a transgo valvebody kit…

Is a C6 transmission a 4 speed?

The C6 is a non-electronic, three-speed transmission. The AOD features a four-speed, non-electronic transmission. It was not until 1992 that Ford introduced the electronic version of the AOD, the AODE.

When did Ford stop making the C6 transmission?

The Ford C6 transmission would go on to enjoy a 30-year service life as Ford phased it out in 1996 to make room for overdrive versions of its big transmission line-up.

What transmission do I have by Vin?

Simply write the VIN number down and you can then ask a dealership service department, auto repair shop, or auto parts retailer to help you identify the transmission. They’ll easily be able to find the specs by plugging the VIN number into the computer.

Will a C6 bolt up to a 390?

No, C6 transmissions are engine family specific as the bellhousing & trans are a one piece casting ie, small block C6 will only fit Cleveland or Windsor, FE (390 etc) will only fit FE, & 385 series (429, 460 etc) will only fit these engines (but will also suit 351M & 400M).

IT\'S FUNNING:  What happens when a car battery gets hot?

Which is better C4 or C6 transmission?

The C4 transmission was primarily used in cars. The C6 transmission could handle more power. Due to the ability to handle more power, the C6 transmission was used in many Ford trucks with bigger engines, and in larger cars that were manufactured with bigger engines.

Does a Ford C6 transmission have overdrive?

The Ford C6 automatic transmission is a great example of this in the automotive world because it’s also the foundation of newer automatics in Ford trucks. … Adding overdrive to a C6 is physically impossible, but the 4R100 can donate its forward planetary gear set for shorter first and second gear ratios.