Question: Which line is the return line on a 4l60e transmission?

Which line is the return line on a 4L60E?

the top radiator line goes back to the trans, it is the return.

Which transmission line is the return?

The lower line near the bottom will be the return line.

Does it matter which transmission cooler line goes where?

Mounting a transmission cooler is typically best in front of the air conditioning condenser so it gets ample air flow. Mounting here provides significant air flow which will help keep temperatures low. In addition, having the right parts to install a transmission makes the process easier.

How do you find the return line on a transmission?

How do you find the return line on a transmission? Expert Reply: The surest way to find the return line in a transmission cooler system is simply to run the cold engine for about 15-seconds while it is in gear. Then immediately feel the two transmission lines.

What happens if you hook up transmission lines backwards?

If you had it reversed, the pump would be trying topush fluid through the bottom of the cooler, up through the cooler, out the top into the bottom of the rad, and up through the rad to the top. More weight to push.

IT\'S FUNNING:  What do you do when your car AC is smoking?

How do I keep my 4l60e cool?

Keep the engine running so that the pump keeps moving oil around. A regular cooler is the best way to go and they aren’t that hard to install. The only other thing that would really help you out would be go to an after market cast aluminum pan with ribs on it to help cool it down.

Can I use rubber hose for transmission cooling lines?

You can use rubber hose, but make sure it’s transmission cooler line rated. The pressure is quite low (12-15 psi). Double clamp it or use FI type clamps instead of the worm-drive style.

How do I know if I have transmission cooler lines?

The surest way to find the return line in a transmission cooler system is simply to run the cold engine for about 15-seconds while it is in gear. Then immediately feel the two transmission lines.

Can you bypass transmission cooler?

When the transmission is cold, the thermal bypass will “bypass” the cooler so it can bring the transmission up to operating temperature more quickly. … The bypass works very well with other coolers, such as the Tru Cool™ 49211 cooler. So if you already have a cooler you like, adding the bypass on is definitely okay.

Are transmission cooler lines directional?

Can Transmission Fluid Flow Through Either Direction on a Transmission Cooler. Helpful Expert Reply: … The cooler can have fluid flow in either direction through it.

Are transmission coolers directional?

The driver side of the radiator based cooler is connected to the front port on the tranny. The rear port on the tranny goes into the secondary cooler which then feeds into the driver side of the radiator based cooler. So, something is backwards.

IT\'S FUNNING:  How much does a car detailer make?

Which line is the return line on a 4l80e transmission?

Early model return line is in the lower front.

How much psi should be in a transmission cooler line?

its about 20 pounds at most , if you do use rubber line make sure its for powersteering/transmission as regular rubber hose will soften and fail from the fluid type not the pressure , but like you I found the hard way that if a little of the line develops pinholes the whole line is shot , I replaced mine with stainless …