Quick Answer: What safety measures should you take when working with running engines and engine parts?

What precautions must you take when working with running engine?

Keep yourself, test leads, clothing, and other objects clear of electrical connections and hot or moving engine parts. Do not wear watches, rings, or loose clothing when working in an engine compartment. Do not place equipment or tools on fenders or other places in the engine compartment.

What are the safety precautions to be made during the maintenance of a vehicle?

Here are 10 engine maintenance tips that’ll help your engine run forever:

  • #1. Change engine oil at regular intervals. …
  • #2. Keep check on the cooling system. …
  • #3. Let it breathe. …
  • #4. Look for leaks. …
  • #5. Don’t keep going on reserve fuel. …
  • #6. Check your belts. …
  • #7. Don’t ignore the check engine light. …
  • #8. Replace your fuel filter.

Why care should be taken with running engine in the automotive workplace when try to diagnosis faults?

Because carbon monoxide (from the vehicle exhaust) is heavier than air, the fumes may build up in the ‘confined space’ under the vehicle. These fumes need not be only from the vehicle being worked on: if other engines are running nearby, there is still a significant risk of exhaust emissions collecting in the pit.

IT\'S FUNNING:  Question: How much does it cost to fix engine oil?

What are the things that you can do to ensure safety while doing any repair?

General Safety

  1. Don’t fool around. …
  2. Never work while under the influence of drugs or alcohol, as you are a hazard to yourself and your co-workers.
  3. Pay particular attention to moving objects, such as equipment, dollies, mixers, and slicers.
  4. Walk, do not run, in the work areas.
  5. Stay completely alert on the job.

What three 3 safety precautions must be observed when working around engines?

Safe work with engines

  • Remove rings, metal watches, bracelets and any loose clothing before beginning work.
  • Tie back long hair.
  • Keep hands clear of all moving parts.
  • Use extreme caution around engine fans, as these may strike you, fling objects, start unexpectedly, or catch dangling leads or strings.

What five 5 precautions should be observed if a vehicle is to be raised on a hoist?

Here’s what they advised.

  • Read the owner’s manual before you begin. …
  • Check the specific “lifting points” of the vehicle you’re working on. …
  • Never exceed your vehicle lift’s maximum capacity. …
  • Don’t rely on a single lift arm to bear all the vehicle’s weight. …
  • Choose an auto lift with automatic safety locks.

What are the safety precaution when using hand tools while the engine is idling?

Reduce the chance of an accident by following the below safety measures.

  • Inspect regularly. Regularly inspect your tools to make sure that they are in good condition.
  • Wear gloves. …
  • Carry with care. …
  • Don’t pocket sharp objects. …
  • Be aware of your surroundings. …
  • Use the right tools. …
  • Follow instructions. …
  • Clean and return.
IT\'S FUNNING:  Does my radiator have a transmission cooler?

What are safety materials?

Personal protective equipment may include items such as gloves, safety glasses and shoes, earplugs or muffs, hard hats, respirators, or coveralls, vests and full body suits.

What precautions should be taken when using compressed air in an automotive workplace?

Wear goggles when using compressed air. Wear a face shield where there is a risk of flying particles. Safety glasses worn beneath a face shield do not provide adequate eye protection goggles must be worn. Wear gloves that the compressed air cannot penetrate, such as rubber or leather.