Your question: How do I know if I have a 42re transmission?

How can you tell if a transmission is 42RE?

According to the 42RE service manual on, the codes are located on the driver’s side of the transmission, stamped just above the oil pan gasket surface. The first group is the assembly part number, followed by the manufacturing date. The last group is the transmission serial number.

What jeeps have 42RE transmission?

42RLE: Four-speed automatic transmission was available from 2003 to 2006 Jeep TJ Wrangler with 4.0L engines. 42RE: The 42RE four speed automatic transmission was used in 1993.3 to 1998 Jeep Grand Cherokees with 4.0L engines.

What vehicles have a 42RE transmission?

How Do I Order?

  • 1989-2003 Dodge Dakota.
  • 1998-2000 Dodge Durango.
  • 1989-2001 Dodge Ram pickup 150 / 1500.
  • 1989-2003 Dodge Ram Van B150 / B250.
  • 1993-2004 Jeep Grand Cherokee.
  • 1996-1998 Jeep Grand Cherokee 5.2 V8.

How do I know what transmission I have in my Jeep Grand Cherokee?

Locate the plate.

  1. Lay on the ground on either side of the Jeep.
  2. Slide under the Jeep to the transmission which is bolted to the motor. Look for a metal plate attached to the transmission. The transmission number is located on the plate. It is the only number on the plate. EX. 42RE.
IT\'S FUNNING:  What does it cost to service an electric car?

How do I find my transmission by VIN number?

Simply write the VIN number down and you can then ask a dealership service department, auto repair shop, or auto parts retailer to help you identify the transmission. They’ll easily be able to find the specs by plugging the VIN number into the computer.

What does 42RE mean?

What does 42RE mean? The 42RE used an electronic governor to control the transmission’s first through third gear bands, clutches, planetary gear sets and over-running clutch system.

How do I identify my Jeep transmission?

The transmission in a Jeep is identified by an identification plate. This plate is stamped on the housing of the transmission and the location can vary, depending on the model year of your Jeep. The numbers on the identification plate provide the build date, part number and the build date.

What is the difference between 42RE and 42RLE?

42RE – was used in 96-98 Grand Cherokee’s with 4.0 and automatic. 42RLE – is what is used in the wranglers in 03-06. Both are 4 speed overdrive rear wheel drive transmissions. It’s only the ‘R’ designation that denotes the difference.

Whats the difference between 42RE and 42RH?

The 42RH was a medium-duty transmission, while the 42RE was a heavy-duty version of the same transmission. … They featured identical gear ratios, but the 42RE used electronic components to shift gears. The 42RH used a mechanical hydraulic system.

How do I know what transmission I have?

Open the driver’s side door and find the white card on the side of the door that is filled with small black lettering. This card contains specific details about the year the car was made, its transmission, engine specifications and other details. Underneath or beside the “TR” symbol will be a number code.

IT\'S FUNNING:  Quick Answer: Why would a motor run backwards?

What did the 42RE transmission come in?

The 42RE transmission was first introduced in Dodge and Jeep vehicles in 1993: Dodge Ram 1500 pickup, Dodge Ram B150 Van, Dodge Dakota, Jeep Grand Cherokee, and the Dodge Durango.

How many quarts does a 42RE transmission hold?

The 42RE – about 4 quarts for filter replacement, about 10 quarts for “overhaul fill.”

How do I know if my Jeep has a CVT transmission?

Discovering if your car has a CVT can be difficult by just looking at the shift lever, and pedal arrangement may be identical to an automatic transmission. A few keys to look for would be a lack of shift points while driving and the type of transmission fluid that is recommended for your car.

What transmission does my 2004 Jeep Grand Cherokee have?

The transmission in a 2004 Jeep Grand Cherokee iS4 & 5-speed automatic.